PCS950 PLUS MPI/Profibus-dp | LAUER Operator Panel

1 = LCD-display, 4 lines each with 40 characters2 = Function keys (also soft keys) F1…F8 each with a yellow and a green message LED3 = Function keys F9…F16 each with a yellow and a green mesage LED4 = Ten key keyboard for nominal value input5 = Cursor key with LED and control key for menu and nominal value input6 = Important information LEDs on the PCS status7 = Reset key8 = DIL switch for the PCS 0959 = Volume for acoustic signalsJ = Serial interface RS 232/TTY for the communicationK = Serial interface RS 422/RS 485 for the communicationL = Serial interface RS 232/TTY for the programming and for the PCS 095.1 as Printer interfaceM = Operating voltage terminalsN = Fuse with reserve fuseThe PG interface is occupied if the communication between the PCS and the Siemens S5 runs via the L1 standard or L1 direct protocol.As the smaller PLC systems only have a PG interface, this leads to problems during running as a simultaneous application of PG and PCS is not possible.The Automux PCS 809 removes this problem. The PCS 809 broadens the PLC-PG-interface so that the PG and the PCS can serve the PLC together. The switch over to MUX follows automatically. The PCS 809 is intended to be used as a commissioning tool. After the start-up procedure the PCS is connected to the PLC via the PG interface. We recommend the Automux PCS 809 for the Siemens PLC