FBM4/39/44 P0500RY | FOXBORO I/A Series Termination Cable

P0500RYCABLE TERMINATIONFBM04/39/44Use this procedure to prepare the multicore (multiconductor) signal cable for connection to the transmitter terminals. Refer to Figure 9 for this procedure.1. Strip back outer jacket and foil shield as shown. Cut outer shield lead flush with edge of jacket. (This shield should end in the transmitter housing without making electrical contact.)2. Strip back inner jacket and foil shield as shown. Do not cut inner shield lead.3. Strip back lead jackets as shown. Do not cut shield leads.4. Strip insulation from white and black leads to be used with the special lugs (Part No. K0123CP) supplied with the flowtube.