CC-FSMX01 | Honeywell Optic Module

CF Fiber Optic Module, Single Mode1. If the CF9 IOTA is installed on a carrier in a cabinet, loosen the screws holding the Control Firewall module to the IOTA and remove the module from the IOTA so power is removed from the J2 connector on the IOTA. (It is not necessary to completely remove the long gray plastic screw located on the module’s face.)2. Carefully align the pins in the bottom of the fiber optic module with the sockets in the J2 connector on the IOTA and gently push down on the module until it is fully seated.3. Tighten the two screws in the base of the module to secure it to the IOTA as shown in the following example illustration.4. Connect appropriate fiber optic cable to the LC or MTRJ plug provided with the fiber optic module.5. Plug the cable plug into the fiber optic module port as shown in the example illustration below