8306E | Triconex Power Module

Each Tricon chassis is equipped with two Power Modules—either one is fully capable of running the Tricon at full load and rated temperature. Each Power Module can be replaced online. The Power Modules, located on the left side of the chassis, convert line power to DC power appropriate for all Tricon modules. Terminal strips for system grounding, incoming power and hardwired alarms are located on the lower left corner of the backplane. Incoming power should be rated for a minimum of 240 watts per power supply.Isolation >1,000 VAC or 1,500 VDC, Input to OutputInput Terminations Protected by safety coverAccepts three 12-gauge wires (3.310mm2): neutral, hot, andprotective earth (chassis ground)Over-Temp. Sensor Temperature warning monitor—trips when internal temp. isgreater than 181° F (83°C); this typically occurs at ambienttemperature 140°F (60°C) or higherAlarm Contacts Normally open, normall