16182-1-3 | Siemens Moore MBX Transistion Board

The DP/IO Bus Link transition board includes static-sensitive components that are not readily visible. Follow procedures that reduce the likelihood of electrostatic discharge: keep the board in static-shielding packaging until it is ready for installation, ensure that personnel handling the board are grounded through an antic-static wrist strap, and avoid touching connectors.1. Identify the slot location where the QUADLOG controller was installed.2. Tilt the transition board slightly with the top toward the MODULRAC chassis.3. Slide the transition board under the MODULRAC cage so that the board’supper edge fits into the groove in the backplane.4. Pivot the transition board in an arc toward the MODULRAC chassis, locatingthe board on the alignment pin.5. Secure the transition board to the MODULRAC chassis using the two captivescrews attached to the board.