TLC538F | BERGER LAHR SAM SERVO DRIVE

The drive systems described here are products for general use that conform to the state of the art in technology and are designed to prevent any dangers. However, drives and drive controllers that are not specifically designed for safety functions are not approved for applications where the functioning of the drive could endanger persons. The possibility of unexpected or unbraked movements can never be totally excluded without additional safety equipment. For this reason personnel must never be in the danger zone of the drives unless additional suitable safety equipment prevents any personal danger. This applies to operation of the machine during production and also to all service and maintenance work on drives and the machine. The machine design must ensure personal safety. Suitable measures for prevention of property damage are also required.The controller is a component of the Twin Line unit range for control of stepper motors and AC servomotors. The controller with integrated controller and power circuit operates as a standalone power amplifier or in the field bus interconnection. It can control positioning on an AC synchronous servomotor and carry out positioning operations on its own.The controller is available in four power levels with similar case design. Electrical connections and functional scope are identical for all fourunits.The controller is available in two types with identical functions:• IP20 variant, in degree of protection IP20, for use in a switch cabinet• IP54 variant, in degree of protection IP54 (category 2 under EN60529), for use without switch cabinet near the motor