PQM0A150EXXYST0 | SANYO Driver Power Supply

* While using two (2) or more motors, leakage current from each motor should be added.* These values are applicable when a tough rubber sheath cable of 2M is used as a power line. In the case of a shorter or longer cable length, values of the above table should be selected as closely as possible.* The machine should be grounded so that dangerous voltage does not occur at the main part of the machine, such as the operation panel, etc., during a period of emergency leakage current.* The value of leaked current is the measured value using ordinary leak checkers (Filter 700Hz). When electric leakage current of high frequency flows through the floating capacity of the motor winding, power cable or amplifier, malfunctions may occur in the short circuit breaker and protective relay in the power supply electric circuit. Use the inverter as an electricity leakage breaker to provide countermeasures for incorrect operations.