FS-IOBUS-CPX-1 | Honeywell I/O Bus From Controller To Ext Cabinet Cable

The IOBUS-CPIOx (where x = 1…8) is a vertical IO bus (34-wire flat cable) from the Controller chassis(CPCHAS-0001 or CPCHAS-0002) to one or a maximum of 8 IO chassis (IOCHAS-0001S or IOCHAS0001R or IOCHAS-0002S or IOCHAS-0002R) within a Safety Manager cabinet.All scan, test and update actions between the QPP module and IO modules are routed via these IOassemblies. The IOBUS-CPIOx is used for redundant as well as non-redundant (Controller and/or IO)configurations.The IOBUS-CPIOx cable assembly is divided into 8 separate assemblies. Each assembly has its own partnumber and an own number of connections between Controller chassis and I/O chassis. The connectorthat is the closest to the ferrite is connected to the controller chassis. Depending on the number of the IOracks and the position of the IO racks, you must select the appropriate cable. If less than 8 IO chassis areused, the left over I/O connectors of the cable assembly will not be used.