1734-OB8C | Protected Output module

To remove a mounting base, you must remove any installed module, and themodule installed in the base to the right. Remove the Removable TerminalBlock, if wired.1. Unlatch the RTB handle on the I/O module.2. Pull on the RTB handle to remove the Removable Terminal Block.3. Press the module lock on the top of the module.4. Pull on the I/O module to remove from the base.5. Repeat steps 1, 2, 3 and 4 for the module to the right.6. Use a small bladed screwdriver to rotate the orange base locking screw toa vertical position. This releases the locking mechanism.7. Lift straight up to remove.I/O messages are sent to (consumed) and received from (produced) the POINTI/O modules. These messages are mapped onto the memory of the processor.The POINT I/O output module produces 1 Byte of input data (scanner Rx)(status). It consumes 1 Byte of I/O data (scanner Tx).