1734-IE4S | POINT I/O MODULE

The 1734-IE4S is a POINT I/O Safety Analog Input Module. It has 4 single-ended/module Inputs and a Input Type of Voltage, Current, or Tachometer with an Modes of Bipolar or Unipolar. This Safety Analog Input Module has an .The 1734-IE4S module supports dual-channel equivalent mode. To use this mode, configure the 1734-IE4S for single-channel operation, then the analog input pairs will be evaluated as pairs. It can run on version 21 of the Studio 5000 Environment software, on version 18 of the RSLogix 5000 software over the EtherNet/IP network, or on version 10 of the RSNetWorx software over the DeviceNet Network. The 1734-IE4S input module needs the field power to be applied to it when it is updating its firmware. The 1734-IE4S’s tachometer code range is 0 to 1000, its current code range at 4 to 20 mA is -8192 to 32767, and its voltage code range is -32768 to 32767 in bipolar mode and it is 0 to 32767 in the unipolar mode. The tachometer frequency range is 1 to 1000 Hertz and the over range threshold is 1 kHz. The current over range threshold is 20 mA at 0 to 20 mA and 4 to 20 mA and the current underage threshold is 0.5 mA at 0 to 20 mA and 4 mA at 4 to 20 mA. The voltage over range threshold is 10 Volts at 0 to 10 Volts and it is 5 Volts at 0 to 5 Volts. The voltage under range threshold is 0.5 Volts at 0 to 10 Vols and it is 0.25 Volts at 0 to 5 Volts.