1734-ADN | POINT I/O DeviceNet Network Adaptor

The 1734-ADN belongs to the POINT I/O modules that is mainly used as for implementing Distributed I/O systems in an industrial application. Point I/O, including the 1734-AND have small and compact assembly which are DIN rail mounted and feature low density I/O capability.
The 1734-ADN is installed on the leftmost portion of a POINT I/O rack which serves as the as the adapter to transfer local POINT I/O data to the master controller in the DeviceNet network through the integrated DeviceNet communication port.
This module is configurable using RSLOgix Studio 5000 or RSNetworkx for DeviceNet. The module’s firmware may also be upgraded using the ControlFlash utility. Firmware upgrade are executed to make a certain module compatible with the existing modules or to enable and disable functions.
When installing this adapter, the adapter must be positioned vertically to the DIN rail. Apply firm pressure to the adapter while pushing it to the DIN Rail. The locking mechanism shall lock the adapter automatically. Attache the DeviceNet plug to the DeviceNet terminal and tighten the holding screw located on both sides of the DeviceNet terminal.
Configure the module by modifying the displayed numerals using the embedded thumbwheel switch located on the upper right side of the module. Valid address are o to 63. If the address is set to 64 to 99, the adapter’s node address become configurable using the RSnetworkx for DeviceNet software. When configured at this address, the module uses the address stored within the non-volatle memory as default address when the module is powered up.