140AMM09000 | Schneider Electric ANALG IN/OUT 4CH/2CH

The Analog In/Out 4/2 bi-directional module combines four analog inputs whichaccept a mix of current and voltage, with two isolated analog outputs that control andmonitor current in 4 … 20 mA loops.1. Jumpers are required between IN (+) and SENSE terminals for all current inputranges.2. Pins 1 … 20 are outputs.Pins 21 … 40 are inputs.3. Use shielded signal cable. In noisy environnements, twisted shielded cable isrecommended.4. Shielded cables should be connected to the PLC’s ground.5. A Shield Bar (STB XSP 3000 and STB XSP 3010/3020) should be used toconnect the shielded cable to ground.6. For Inputs, the maximum channel to channel working voltage cannot exceed30 Vdc.7. N / C = Not Connected.