3006 | Invensys CPU Module

Feature DescriptionIsolation 1000 VAC or 1500 VDC, Input to OutputRecommended input voltage range 24 VDC, –15% to +20% (protected against reverse connection)Extended input voltage range11. During normal operation, you should keep the input power within the recommended input voltagerange. Operation in the extended voltage range is advisable only for short periods of time.Be careful to minimize input transients which are caused by the off/on switching of the redundantpower source. Do not allow the power source to drop below the minimum input voltage (19.2 VDC)when its load increases to 100% of the Tricon controller power module requirements, or rise abovethe maximum voltage (36 VDC) when the load decreases to 40 to 60% of the Tricon controller powermodule requirements.For example, assuming minimal voltage losses to the input wiring and a power source of 24V ±5%,the transient response to the power source should not exceed these limits.19.2 to 36 VDCLow line on/off hysteresis 1.5 VDC minimumInput power required 240 W minimum per power sourceInput over-voltage clamp 40 VDC